Dělící jednotka IE-MiniFiberLinxII/Telco

Dělící jednotka IE-MiniFiberLinX-II Obdobná jednotka jako je FiberLinx-II

IE-MiniFiberLinX/Telco jsou navrženy pro nasazení s -48VDC napájením podle Bellcore GR-499 specifikace typické pro Telco aplikace. Jednotky nepodporují PoE napájení.

Funkce a specifikace:

  • General
    • Preserves complete end-to-end fiber connection integrity
    • Bi-directional bandwidth control (per port, per direction, per VLAN)
    • Read/write IEEE 802.1Q VLAN-tags
    • Extra Tagging with Q-in-Q mode (802.1p)
    • Supports passive 802.3ah OAM (Operation, Administration & Management)
    • QoS: IEEE 802.1p-based packet prioritization (2 queues [high/low] with 8 levels of priority)
    • VLAN filtering up to 32 values
    • Layer 2 packet switching, store and forward operation
    • Forwarding rate: 14,881 pps for 10 Mbps; 148,810 pps for 100 Mbps
    • AutoCross for MDI/MDIX
    • Features Auto Negotiation and Selective Advertising
    • Supports Half and Full-Duplex operation
    • MTU: Supports over-sized packets up to 1916 bytes per packet
  • Security
    • Password Control
    • Multiple Access Levels: User Assigned Accounts & Access Levels
  • Management
    • SNMP V1 and V2c compatible
    • Includes GUI-based iView² software for remote management and upgrades
    • Monitors far-end (remote) status without a physical presence or separate connection
    • IEEE 802.3x Flow Control
    • Includes DHCP and TFTP clients
    • Supports Telnet
    • Includes loopback test modes (MAC swap)
    • Includes LinkLoss and FiberAlert
    • Remote capabilities with built-in support for UMA (IP-less management)
    • RS-232 (Craft) interface for local management
    • Serial cable for direct connection to a PC’s Serial Port
  • Ethernet Types Supported
    • IEEE 802.3i 10Base-T twisted pair
    • IEEE 802.3u 100Base-TX twisted pair
    • IEEE 802.3u 100Base-FX or SX fiber
  • Mechanical
    • Dimensions 0.83”H x 1.80”W x 3.35”D (2.11 x 4.57 x 8.51 cm)
  • Power
    • AC Wall Adapter: 100 to 240 VAC ±10% input, 5 VDC output, 2A max.
    • DC Input Voltage: 12 to 48 VDC *, 1 to .02A, 7 to 50 VDC, 1 to 0.1A
  • Environmental
    • Operating Temperature:
      -49° to +185° F (-45° to +85° C) DC Telco
      -13° to +167° F (-25° to +75° C) DC Adapter
      +14° to +122° F (-10° to +50° C) AC Adapter
    • Storage Temperature -49° to +185° F (-45° to +85° C)
    • Operating Humidity 5 to 95% Non-condensing
  • Regulatory Aprovals
    • FCC Class A
    • UL/cUL, CE, CSA, CB

Informace pro objednávku

Model Fiber Fiber Ports Range Ethernet Ports Ethernet Connector

IE-MiniFiberLinX-II/Telco

856-17620 MM850-ST 1 2 km 1 RJ45
856-17621 MM850-SC 1 2 km 1 RJ45
856-17622 MM1300-ST 1 5 km 1 RJ45
856-17623 MM1300-SC 1 5 km 1 RJ45
856-17626 SM1310/PLUS-ST 1 30 km 1 RJ45
856-17627 SM1310/PLUS-SC 1 30 km 1 RJ45
856-17628 SM1310/LONG-ST 1 80 km 1 RJ45
856-17629 SM1310/LONG-SC 1 80 km 1 RJ45
856-17631 SM1550/LONG-SC 1 80 km 1 RJ45
856-17632 SM1550/XLONG-SC 1 100 km 1 RJ45

Single Strand Fiber*

856-17640 SSFX-MM1310-SC 1 2 km 1 RJ45
856-17641 SSFX-MM1550-SC 1 2 km 1 RJ45
856-17642 SSFX-SM1310-SC 1 20 km 1 RJ45
856-17643 SSFX-SM1550-SC 1 20 km 1 RJ45
856-17644 SSFX-SM1310/PLUS-SC 1 40 km 1 RJ45
856-17645 SSFX-SM1550/PLUS-SC 1 40 km 1 RJ45
856-17646 SSFX-SM1310/LONG-SC 1 60 km 1 RJ45
856-17647 SSFX-SM1550/LONG-SC 1 60 km 1 RJ45

Příslušenství

806-39720 AC Power Adapter and Country-Specific Clips<

* These products have single-strand fiber technology. Deploy in pairs or connect another compatible B&B IMC LLC single-strand fiber product.


© MEDIAKONVERTORY.CZ Všechna práva vyhrazena.

vytvořilo hotpotato – platné xhtml & css, používejte Mozillu – nejlepší dostupný prohlížeč